SFOM096YZ4-12864WB-02 Specification.pdf
Product Introduction
0.96-inch OLED with 4-pin PCB is a miniaturized display module widely used in embedded systems and portable electronic devices. This type of display screen plays an important role in fields such as smart watches, health trackers, and industrial equipment due to its small size, low power consumption, and high contrast. Due to its modular design, it can be easily integrated into various electronic products, providing users with intuitive information display.
In addition, driver ICs for 0.96-inch OLED with 4-pin PCB modules such as SSD1306, SSD1315, etc., due to their standardized design, further enhance their versatility on various devices. This high level of compatibility provides great convenience for users when designing embedded systems or DIY projects.
Features
0.96-inch OLED with 4-pin PCB products typically have the following technical specifications:
- Resolution: 128x64 pixels, providing clear text and image display.
- Driver chips, such as the SSD1306/SSD1315 chip, are compatible with multiple development platforms, simplifying the development process.
- Working voltage: usually between 3V and 5V, with good power compatibility, compatible with 3.3V and 5V logic levels, without the need for additional level conversion chips.
- Viewing angle: With a super large viewing angle greater than 160 °, it ensures good display performance at different viewing angles.
- Color options: Provides multiple color options such as yellow blue, white light, and pure blue to meet different visual needs and design preferences.
- Display mode: Supports multiple display modes, including graphic and text display, suitable for various information display needs.
- Power consumption: Under normal display conditions, the power consumption is only 0.06W, much lower than traditional TFT displays, making it suitable for applications with strict power consumption requirements.
- Installation method: The 4-pin PCB design allows for fixation through standard circuit board installation procedures while providing good electrical connections.
- Signal integrity: Considering the stability and reliability of signal transmission, PCB wiring should be as short and direct as possible to reduce signal interference
- Heat dissipation design: OLEDs generate heat during operation, and PCB design should consider heat dissipation pathways, such as optimizing thermal management through layout or heat dissipation pads.
- Anti interference design: To reduce electromagnetic interference (EMI), PCB design should adopt appropriate shielding and filtering measures.
Outline Drawing
Interface Pin Definition
| Pin No. | Symbol | Description |
| 1 | GND | round of Logic Circuit. This is a ground pin, it must be connected to ground. |
| 2 | VDD | Power Supply for OLED. This is a voltage supply pin. it must be connected to source. |
| 3 | SCL | This serial clock input SCL |
| 4 | SDA | This serial data input SDA |
Electro-Optical Characteristics
| Items | Symbol | Min. | Typ. | Max. | Unit | Remark |
| Operating Luminance | L | 80 | 100 | - | cd /m2 | All pixels ON |
| Power Consumption | P | - | 50 | 60 | mW | 30% pixels ON |
| Frame Frequency | Fr | - | 105 | - | Hz | - |
| Color Coordinate | Blue | CIE x | 0.11 | 0.15 | 0.19 | CIE1931 | Darkroom |
| CIE y | 0.21 | 0.25 | 0.29 |
| Response Time | Rise | Tr | - | 10 | - | us | - |
| Decay | Td | - | 10 | - | us | - |
| Contrast Ratio | Cr | 10000:1 | - | - | - | Darkroom |
| Viewing Angle |  θ | 160 | - | - | Degree | - |
| Operating Life Time | Top | 22000 | - | - | Hours | L= 80 cd/m2 |
Product Image
Reliability Test
| No. | Item | Condition | Quantity |
| 1 | High Temperature Storage (HTS) | 85±2℃, 200 hours | 3 |
| 2 | High Temperature Operating (HTO) | 80±2℃, 96 hours | 3 |
| 3 | Low Temperature Storage (LTS) | -40±2℃, 200 hours | 3 |
| 4 | Low Temperature Operating (LTO) | -40±2℃, 96 hours | 3 |
| 5 | High Temperature and Humidity Storage (HTHHS) | 50±3℃, 90%±3%RH, 120 hours | 3 |
| 6 | Thermal Shock (Non-operation) (TS) | -20±2℃ ~ 25℃ ~ 70±2℃ (30min) (5min) (30min) 10cycles | 3 |
| 7 | Vibration (Packing) | 10~55~ 10Hz,amplitude 1.5mm, 1 hour for each direction x, y, z | 1 Carton |
| 8 | Drop (Packing) | Height : 1 m, each time for 6 sides, 3 edges, 1 angle | 1 Carton |
| 9 | ESD (finished product housing) | ±4kVR:330Ω; C:150pF 10times,air discharge | 3 |
Compare with competitors
In the market of 0.96-inch OLED with 4-pin PCB products, there are multiple competitors with different advantages and characteristics. Compared to its competitors, SAEF TECHNOLOGY has the following advantages:
Technology and Innovation Capability: SAEF has a deep accumulation in OLED display technology, which can provide products with high resolution and excellent color performance, while continuously launching innovative products to meet market demand.
Capacity and Supply Chain: SAEF has strong production capacity and a comprehensive supply chain system, which can ensure stable product supply and quickly respond to market changes.
Customized Services: SAEF can provide customized services to design and produce 0.96-inch OLED with 4-pin PCB products of specific specifications according to customer needs, meeting the requirements of specific application scenarios.
Brand influence: The SAEF brand has higher recognition and trust in the market, and our products can gain more market attention and customer choice.
Facilities and Certificates
Contact Us
We love to hear about your projects, If you have any questions, we can be reached at sales2@saef.com.cn
Product Tags:
|
|
0.96 Inch OLED Display With 4pin I2C Control PCB Board White/Blue/Yellow Blue Images
|
